Blink Once If Your Headlights Go Up and Down | 1985 Fiero 2M4 Revival - Part 4

Definitely not many big milestones hit like in the previous two episodes, but there's still a lot of fun stuff done. There's wiring, welding, grinding, wire-wheeling, taking aparting, lubricationing, all the ings really. Every ing ever. In this video.
My Gear! (Affiliate Links):
Film -
Shop Tools -
Shop Safety -
Rodney Dickman:
Music From:

Татаж авах


  • Heyo 👋🏻 I wanted to make it clear that it’s gonna be a super long time before the next video comes out. This was the last of the footage for a complete episode. I know I said there’s 6 more after this, but that’s because I am allocating specific tasks to specific episodes. 5 will be interior 6 will be engine and tranny work 7 will be suspension 8 will be bodywork and paint 9 will be various things that still need addressing 10 will be a finale video They will be made, you guys just gotta hold tight. See you all when I post the next video in 2023

    Ronald FingerRonald Finger2 жилийн өмнө
    • liar

      GorbGorbЖилийн өмнө
    • Bro, friends don't let friends use Fram oil filters. Total garbage. I would only put one on a car that I either 1) hated or 2) was going to sell/trade in

      ED EeeDee1ED EeeDee1Жилийн өмнө
    • @Ronald Finger Not sure if it'd be ok on the valve cover but I've seen people take a nut, place it over the broken bolt and weld the nut to the bolt from the inside. Since the engine block is aluminum, any splatter should be fairly easy to remove. That's just a suggestion, I've never actually tried it. I work on small engines and just got a 78 Ford Fairmont as a daily driver that is getting me into working on cars, next big thing for that after the tuneup is dual exhaust.

      BeaterofAincradBeaterofAincradЖилийн өмнө
    • Dude you better be joking I’ll be 16

      Epic gamer 986_Epic gamer 986_Жилийн өмнө
    • its been 5 months!!!

      Adrian IglesiaAdrian IglesiaЖилийн өмнө
  • It's not age. Cork gaskets are just a pain in the ass to clean. I don't know how it adheres to the metal so well.

    Sam H.Sam H.3 өдрийн өмнө
  • 15:03 Just a note, I wouldn't advise wearing gloves with any rotating tools. I've had fingers pulled into a drill before wearing gloves, luckily it was a handheld drill, so I was able to quickly stop it.

    Meat.Eater.MeteorMeat.Eater.Meteor3 өдрийн өмнө
  • First time I tried to change a valve cover I didn’t have a torque wrench and I snapped the head off of a bolt

    dillonIRLdillonIRL4 өдрийн өмнө
  • Re-watching the series before the possible last episode!

    nick kerkhofnick kerkhof5 өдрийн өмнө
  • If you pause at 20:58 you can see his ass.

    ScrubworksScrubworks7 өдрийн өмнө
  • "Camp Dank" LOL

    FD KyYodieFD KyYodie12 өдрийн өмнө

    Lu LuongLu Luong17 өдрийн өмнө
  • "It's probably just leftover electricity that turned to grease over time".... yeah, probably

    Daymond TraweekDaymond Traweek21 өдрийн өмнө
  • At least you knew to check the o-ring still on the car when not finding it on the filter. I did not do that, and dumped a lot of oil due to having two o-rings on...

    ANameThatIsn'tMyOwnANameThatIsn'tMyOwn22 өдрийн өмнө
  • Pontiac got slammed for their poor rear deck design which allowed rain water, snow and salt spray to drip down on the battery and tray doing exactly what it did on your car.

    ToughAncientSparkToughAncientSpark24 өдрийн өмнө
  • @21:10 Was that a Scotty Kilmer cameo?

    ToughAncientSparkToughAncientSpark24 өдрийн өмнө
  • WOW. I never thought of doing a project car video this way where there’s only like 8 episodes. That sounds great. I might just do my own. Love the content so much. It watches like a TV show. I actually watched this till my phone died so congrats to you 🔥

    Kaledon GrandyKaledon Grandy24 өдрийн өмнө
  • Don't rec using fram oil filters. Nice video series

    Mattaaa92Mattaaa9226 өдрийн өмнө
  • I tighten valve cover bolts like spark plugs. Hand tight then a ¼ turn with a wrench

    Russell HaydenRussell Hayden27 өдрийн өмнө
  • imagine this: a fiero with a center popup light that follows the steering wheel like a tucker 48

    NeedForWeedNeedForWeedСарын өмнө
  • Love v the videos man

    yaballa85yaballa85Сарын өмнө
  • watching this again in dec '20 and hearing "There are six more episodes" made me chuckle :-D.... I love that build and at least once a month sometimes once every weekend i watch the playlist over and over again :-)

    Atzels WorkshopAtzels Workshop2 сарын өмнө
  • No fret..I've broken alot of vc bolts...why?????🙄

    Buckethead LuteBuckethead Lute2 сарын өмнө
  • I'm binge watching this whole rebuild, I'm no pro, but I've changed a few valve covers in the past and soon as i saw you doing up that bolt, i was cringing knowing that was way too tight.... then you popped up in post and said exactly what i knew was going to happen lol, I'm glad it didn't leak 👍😂

    Steve FSteve F2 сарын өмнө
  • Came for the Fiero, stayed for the leg

    Anthony RyanAnthony Ryan2 сарын өмнө
  • You used a fram oil filter? Dude I thought you cared about that car!

    Joseph SmithJoseph Smith3 сарын өмнө
  • 19:03 ',:/ mmm, not quite

    Worse Than YouWorse Than You3 сарын өмнө
  • Who's here in 2020?

    BeastV8BeastV84 сарын өмнө
  • What did you say at 0:07 ?

    Christian SavageChristian Savage4 сарын өмнө
  • If you have not removed the valve cover bolt, take a spring loaded punch, or automatic punch. Find a small part of the bolt sticking up, place the tip of the punch and work the automatic part turning in the CCW direction. The spring loaded pop will free up some bolts. It takes time.

    Brian FBrian F5 сарын өмнө
  • I gotta see Pumphrey’s response to this.

    liny2sdliny2sd5 сарын өмнө
  • So stupid question, I need to replace the brushes on my fiero, that pen you use, is it also a adhesive?? How is it still holding up. I saw Rodney Dickman sold a glue you have to mix, much rather use a pen if possible. Where did you pick that pen up at??

    Jamie SmithJamie Smith6 сарын өмнө
    • It is technically not an adhesive, but it can still act as one. I've had them installed for two years now with no issues. Granted, I haven't driven the car all that much so that's not a fair test. If I had to guess, I'd say Rodney's adhesive would be worth it. But the pen I got was just from a local Fry's Electronics store!

      Ronald FingerRonald Finger6 сарын өмнө
  • Super nerd: "40 thousand years of evolution and we haven't even tapped the ????? of human potential." Ronald; "??? ????? ????" Super nerd: Spit take Can anybody fill in the blanks on what was said?

    61Slughi61Slughi6 сарын өмнө
  • Granite counters make the best work surface.

    Michael GeninMichael Genin6 сарын өмнө
  • Driving without tags is only a problem if you get caught. Go away snowflakes.

    TED SchmittTED Schmitt6 сарын өмнө
  • Fram filters are garbage. Don't use them in the future.

    Austin CliffordAustin Clifford7 сарын өмнө
  • Valve cover bolts = 1/4 drive ratchet held at the top. When my brother was teaching to work on engines, he took my 3/8 sockets and ratchets away from me just for the valve cover bolts I kept breaking ! But I soon got the hang of it. Just takes practice. And by the way, I still use 1/4 drive sockets on valve cover bolts.

    JeffJeff7 сарын өмнө
  • Those with welding experience, does getting the sparks on you painful?

    James RainvilleJames Rainville7 сарын өмнө
  • You are doing a really good job. Impressive!

    Jim BranhamJim Branham7 сарын өмнө
  • The donkey wanted to tell u, but u didn't listen 😂😂

    Levia BarisolLevia Barisol7 сарын өмнө
  • 21:39 "What the fuck" lolll

    kwesontkwesont8 сарын өмнө
  • Oh that torque wrench for a valve cover bolt really hurt me.

    Skeeter SkeetSkeeter Skeet8 сарын өмнө
  • Pop pop up and down headlights

    Guy TatlerGuy Tatler9 сарын өмнө
  • What we need here is a montage with a bit more of an A-Team style.

    Daniel HarringtonDaniel Harrington10 сарын өмнө
  • And oh god that angle montage!

    Captain MCaptain M10 сарын өмнө
  • Reviving an old comment, but Steel Stick is what we use in the packaged pump systems business I work for. We swear by it for tiny repairs. We don't buy regular ass JB Weld.

    Captain MCaptain M10 сарын өмнө
  • Did this dude say "leftover electricity that turned to grease"?

    Justin WalkerJustin Walker10 сарын өмнө
  • I also like your minimal sense of humor. XD!

    Jury AndradeJury Andrade10 сарын өмнө
  • That epic 80s montage music gets me so *PUMPED*

    Furry TrashFurry Trash10 сарын өмнө
  • @23:46 I foresee great problems in your future...

    ShadowcasterZeroShadowcasterZero10 сарын өмнө
  • I see the ole electricity to grease gag strikes again.

    Tyler RichardsonTyler Richardson10 сарын өмнө
  • Wow man willing to show your mistakes and admitting to them. Im impressed.

    j baliskyj balisky10 сарын өмнө
  • Torque Wrench. Buy a torque wrench.

    3576alan3576alan10 сарын өмнө
  • hold the battery down- hit a bump it will move

    BikemanBikeman10 сарын өмнө
  • Please. Clean up. Before assembling. Oh my God

    gonzalogonzalo10 сарын өмнө
  • I do not understand. And the suspension? They left everything messy

    gonzalogonzalo10 сарын өмнө
    • You do realise that this project isn't even done yet and there are at least 7 more episodes, right?!

      Max ZMax Z7 сарын өмнө
  • I realize this video is over a year old, for a "novice" as you called it you are doing amazingly well even seasoned professional mechanics make mistakes

    Steve JonesSteve Jones10 сарын өмнө
  • I love this series, but I still can't believe you thought this car was a good candidate for a restoration. There are so many things wrong with it, literally every part of the car is trash.

    Hayk SamvelyanHayk Samvelyan10 сарын өмнө
  • Bro. Safety glasses

    LuckyScavBoiLuckyScavBoi10 сарын өмнө
  • At least you didn’t do what I did and wasn’t paying attention and tightened a bolt instead of loosing with a torque wrench

    Ruxes_ TecRuxes_ Tec10 сарын өмнө
  • if realese all parts in that car. will be easy. to clean and paint. then easy find out many dust parts2 to clean..

    Donny PraDonny Pra10 сарын өмнө
  • As you were tightening that valve cover down, I was thinking you had to much force on that, and then......

    John CookJohn Cook11 сарын өмнө
  • “It’s probably just leftover electricity that turned to grease over time.” This is gold 😂

    Hazem ElshabiniHazem Elshabini11 сарын өмнө
  • Damn you’ve even got a 90’s Craftsman Rally Box.

    M2000M200011 сарын өмнө
  • oh no not a FRAM ! Ive made this mistake to many times before i knew it was made from cheap card board, I have to say these videos are very entertaining to watch I myself am fixing my 98 mustang GT so its awesome to just watch and learn. I know my grammar is awful lol

    R JR J11 сарын өмнө
  • Hello,nice video! congratulations!! where do you buy the brushes (contactor plates)? what brand are those?

    Abelardo Pérez CastilloAbelardo Pérez Castillo11 сарын өмнө
  • @Ronald Finger Another tip for you. If you break off a bolt again and need to drill it out, next time go to Harbor Freight (or order online) a set of left hand twist drill bits. You run the drill in reverse to drill it out. A lot of times in the process of drilling out the bolt you will end up removing the broken bolt threads because the friction heating of the bolt while drilling will loosen the broken threads and spin them out.

    Vance OgdenVance Ogden11 сарын өмнө
  • Easier to just replace those bad motors. The Pontiac Firebird and Fiero use the same motors except they are reversed. IE the drivers side on the Fiero is the passenger side motor in the Firebird and vice versa. The motors are flipped around and mounted on the opposite side. I found this out the hard way when I ordered one from an Ebay seller and his listing was wrong and he sent me the wrong one. He apparently didn't know that. I confirmed by checking part numbers at O'Reilley's. As a plus tho the Ebay seller didn't want to pay return shipping for his error so he called it a loss and refunded my money, which means I now have a free spare headlight motor for the side that didn't need replacing. :-) This is on the 87 anyway. But being a "use what we got for parts to save money" car, it's guaranteed the 84 motors came from another car too. Maybe from the Firebirds of that year also. The GM big whig brass kept cutting Pontiac's Fiero development budget so they couldn't afford to make parts just for it.

    Vance OgdenVance Ogden11 сарын өмнө
  • It physically jerky when the bolt broke. I seen it comi g and as soon as the video cut to you in your office I knew it too late.

    levi moorelevi moore11 сарын өмнө
  • STOP RIDING THE FREAKING CLUTCH!!!!!!!!!! I have tears in my eyes every time I see you go to take off. Only thing in life you should ever ride that hard is your old lady!!!!!!!

    Thomas PiggThomas Pigg11 сарын өмнө
  • battery strap could be a old bike tube cut down and come up with a clip of some sort, kinda like a old school military belt :)

    New DawnNew Dawn11 сарын өмнө
  • C M D N A P A K

    TameskaTameska11 сарын өмнө
  • Great video ! Inspirational, I just done one on starting my Ford Prefect after a six month rest, but I wish I had seen this first, great stuff !

    Mark J HicklingMark J Hickling11 сарын өмнө
  • Hey this is awesome hope to see more vids!

    Spencer PetrikSpencer PetrikЖилийн өмнө
  • Somewhere in the world is a blind as all get out little beetle.

    Kyle-A-La-ModeKyle-A-La-ModeЖилийн өмнө
  • Snapdragons! Lights are so cool!

    buddy77587buddy77587Жилийн өмнө
  • Pretty legs

    buddy77587buddy77587Жилийн өмнө
  • Woah, there's now kids who have never driven a gas pedal like that...I guess I didn't even notice them go away.

    Eric SwensonEric SwensonЖилийн өмнө
  • Dont use those fram oil filters only use napa or WIX oil filters the Frams filters are cheaply made and can damage your engine.

    Christopher ElliottChristopher ElliottЖилийн өмнө
  • Pet the damn donkey!

    Stuart BeardStuart BeardЖилийн өмнө
  • 13:07

    Chaos BrownieChaos BrownieЖилийн өмнө
  • Hello Ronald, Steve here from Canada. I'm a long time Fiero owner. I love your videos and your doing a hell of a job, not only on the car but putting the videos together. Well done. I do have a couple words of advice for you and you can either take it or leave it. Its just things I have come across in my many years of tinkering with my Fiero. First off I would change out that fan relay. I know you said it is working fine but, it did take a couple of love taps to wake it up. Keeping a car at proper operating temperatures is key to a long engine life. It only take one oops to cook it. Is it really worth cooking your engine over a $15 part. Just my thoughts. Second Fram is the absolute worst oil filter ever made!!!! Checkout the "worst oil filter ever "video on MNthe. They test several filters and it show how bad it really is. Buy the NAPA Gold best bang for your buck and you can pick it up at any NAPA store. Anyway that is the end of my advice/rant Keep up the good work. Look forward to watching more of your Fiero revival videos.

    Stephen DowlingStephen DowlingЖилийн өмнө

    GorbGorbЖилийн өмнө
  • P-p-pop up and down HEADLIGHTS!!

    Naven MathewNaven MathewЖилийн өмнө
  • I note 3,494 comments. I'm lazy and don't care much for reading comments. While I'm sure it's been said before, two words bruh, "torque wrench". It was a matter of nanoseconds when I saw you honk down on that poor valve cover bolt with the same Break-Over-Bar one would use to break a head bolt loose I knew it was toast. I didn't mean to spew my drink all over my monitor. Excellent Work Young Man! Cheers from Louisiana.

    Rick SheltonRick SheltonЖилийн өмнө
  • 6:45 Flex Seal?

    GriZZZlyGriZZZlyЖилийн өмнө
  • FYI viewing on jan 05 2020. Last video watch was from July 2018. Had no clue you had additional vids. Awesome!

    Stephen BryantStephen BryantЖилийн өмнө
  • January 4, 2020.

    Jack GarrisonJack GarrisonЖилийн өмнө
  • I forgot to secure my car battery once and it slid over and literally got chewed by the alternator. Big hole and no water,

    Joel 74Joel 74Жилийн өмнө
  • So I have to say Ronnie I am finally catching up and I have an 86 GT that I'd love to work on more but it's a slow process but I definitely appreciate your honesty with us and I'm glad it's coming along so smoothlyish lol 😃

    Michael CMichael CЖилийн өмнө
  • @7:38: One of the greatest thermostat designs ever, just pull and replace in 5 seconds. GM: Why the heck did you not continue that design? Oh yeah, can't make money on repairs......

    MassiveTrackHunterMassiveTrackHunterЖилийн өмнө
  • Do you still need a new windshield?

    Carl SlaughterCarl SlaughterЖилийн өмнө
  • Really enjoying these videos! Good job with the story telling

    Eight-MotionEight-MotionЖилийн өмнө
  • 3 or 5 foot pounds? Ha ha! Looks like you were exerting about 50 or 60! Live and learn.

    NidstangNidstangЖилийн өмнө
  • 20:58 nice ass

    Connor WallsConnor WallsЖилийн өмнө
  • gloves on griner are not safe.

    MiraMiraЖилийн өмнө
  • well, making battery pad was cool, but you have done it for only size (or smaller) battery, it is reason why pads mostly don't have static cornerns (battery shapes may differ)

    Algirdas ZemaitisAlgirdas ZemaitisЖилийн өмнө
  • Those headlights though. No idea why but raising headlights like those are badass

    ZeekZeekЖилийн өмнө
  • 10:13 Don't step into the light little bug!

    Thunder KatThunder KatЖилийн өмнө
  • I been a certified tech for 13yrs now and yes working on cars gets old but there is something so satisfying about videos like these. Your'e doing a great job to be a novice honestly. Working on cars 6 days a week i can tell you breaking bolts is normal lol.

    Jason DowdyJason DowdyЖилийн өмнө
  • 14:54 Then god said, let there be popup headlights.

    NapoleonLouvertureNapoleonLouvertureЖилийн өмнө
  • Educate yourself on oil and filters. That Fram is one of the worst you can use...( (

    MrDLRuMrDLRuЖилийн өмнө
  • Helpful pointers...Lower feed and increase amperage on your welder (I'm kind of guessing from looks of your welds). This gives you hotter/better weld penetration and a smoother/flusher weld. Experiment with those setting as there is a fine spot that will be used for most of your welding. The only change from that will be when you weld thinner material. Beginners tend to go too fast as they're welding, so keep that in mind. If right handed, use left hand as support/slider hand. Also, when cutting 45 angle for making a frame. Make the angle SLIGHTLY smaller than a 45, that way it squares up easier/better. I designed the front suspension lift kit for the Jalapeno kit car that fits a Fiero. PISA kit cars..Good luck with your project car.

    MrDLRuMrDLRuЖилийн өмнө
  • This stuff works great for sealing fuel tanks...I don't think it would have helped you, as I see something plastic in the tank. RED-KOTE® The Only "Real" Fuel Tank Sealer and Liner

    MrDLRuMrDLRuЖилийн өмнө